View Basket . .
.
.
Heated Spatulas .

Heated Spatulas

Willard Heated Spatulas - Heated Spatulas and Lining Irons

The Willard system offers a proven and respected range of spatulas (also known as tacking irons) and lining irons, designed and manufactured to the highest standards to provide many years of reliable service. They are in use in leading professional conservation studios worldwide. All models feature electronic sensors to provide accurate and consistent temperature at the tip, or across the sole plate.

Heated Spatulas - Spater 2 with Pre-Programmable Bits

Spatula with a temperature-control station on a digital display. Range: 65 to 450°C. The set temperature when reached remains constant. It is controlled by a red diode. Pre-programming of bits S1, S2, S3 and S6 for accurate temperature display. Silicone cable provides remarkable protection against burning due to accidental contact of the spatula on the cable. Supplied with a standard spatula S7.

Heated Spatulas - Spater 8

Tacking iron designed for restoration, repair and finishing work using heat-activated lamination. A good unit, which provides an alternative solution where budgets will not allow for the added heating-precision provided by the Willard range. Made up of a 40W applicator iron ensuring a considerable temperature reserve, with interchangeable tips. To increase the precision and quality of the work, Spater 8 can be connected to the power regulator which allows operation over a very wide range of temperatures from 0 to 250°C

Heated Spatulas - Model Spater 10

This professional iron is ideally suited to restoration work of furniture, paintings and all heatsealed finishing. Voltage 100W, delivered trouble-free, 4 spatulas to be chosen from according to your needs (available as an optional extra). The temperature of the spatula can be adjusted using an RP500 regulator (optional extra) to suit the job being performed or just to save energy. The temperature is adjusted using a potentiometer, graduated from 1 to 10, in the middle of the spatula that controls the amount of power absorbed. The range goes from 30 to 300°C.

Caution: the SMM, SPM and STPM must be used in conjunction with the RP500 regulator in order to avoid overheating.

Willard Heated Spatulas - Heated Spatulas and Lining Irons

The Willard system offers a proven and respected range of spatulas (also known as tacking irons) and lining irons, designed and manufactured to the highest standards to provide many years of reliable service. They are in use in leading professional conservation studios worldwide. All models feature electronic sensors to provide accurate and consistent temperature at the tip, or across the sole plate.

Control units

The control unit is the heart of the system and its unique design is capable of providing accurate and reliable service over many years. A control unit is needed to operate the Spatulas and Irons.

There are two models: Standard, to regulate spatulas only, or Universal which regulates all spatulas and all irons. Both models will accept the separately available temperature display.

Standard

The standard control unit enables the temperature to be conveniently set on the display by adjusting the large control dial. It automatically switches full power to the heating element quickly on and off to provide an accurate temperature. A red diode illuminates when heat is being delivered to the tool.

Universal

The Universal Control Unit is required for lining irons; 6E, 7E, 8E and 9E. It is also suitable for all Willard heated spatulas. Temperature is set with the large dial on the front of the housing. A wall mounted variant, supplied complete with a built in temperature monitor is also available.

1EC Heated Spatula with Tip Set

The durable and reliable 1EC (Compact) with a set of 7 tips (below) is a highly popular and versatile hand tool system with a range of applications. It is fitted with a durable, wooden handle for comfortable use. Connection to the appropriate control unit is via kink and heat-resistant, silicone-coated flex.

1EM (Miniature) Heated Spatula

This pen-like model is the smallest of its type available, but has a comprehensive range of Mini and Micro-tips for a variety of precision applications. Connection to the appropriate control unit is via kink and heat-resistant, silicone-coated flex. Fitted with any of the Mini-tips or silver Micro-tips, the right amount of heat can be applied with ultimate accuracy to a specific area, making this an ideal tool for tear-mending and many

Micro-Tips to fit 1EM Heated Spatula

This range of Sterling Silver Micro-tips has been specifically developed for use with the 1EM. There are 5 different shapes and styles available, which can be supplied either individually, or as a complete set of 5 tips with an adaptor.

4E Heated Spatula

The 4E Heated Spatula features a fixed, thin, curved sole plate with flanged edge.



Products

Display Results By .
Items 1 - 5 of 15         
Page:
ItemNamePrice / Unit Order Multiple 
Heated Spatula 1EC with 7 tips
EQWHSS0002
Heated Spatula 1EC with 7 tips
Complete set of interchangeable tips
£451.59 
View Item Details
Control Box Universal
EQWCUU0001
Control Box Universal
For use with all spatulas & irons
£689.12 
View Item Details
1EM Miniature Spatula
EQWHSM0002
1EM Miniature Spatula
For use with mini & micro tips
£233.16 
View Item Details
Control Unit Standard 240V
EQWCUS0001
Control Unit Standard 240V
For use with spatulas only
£525.14 
View Item Details
Spater 2 Heated Spatulas with Pre-programmable Bit
EQSPHS0002
Spater 2 Heated Spatulas with Pre-programmable Bit
Includes 1 Tip (S7)
£501.93 
View Item Details
Show items per page
Items 1 - 5 of 15         
Page:
.